How To Install And Maintain Led Track Lights?

How do you install track lights? 

1. Before installing the track light, keep the wiring position, punch a mounting hole on the ceiling, insert the wire into the track light, wrap it with electrical tape, and then fix the lamp and track with screws and screws to adjust the illumination direction of the light. After installing the track light, turn on the track light to check its function of the light.

2. The track spotlight installation includes a track, a lamp base mounted on the track, a lamp holder fixed on the lamp base, a lamp holder mounted inside the lamp holder, two conductive plates inside the track, and a strip groove at the bottom of the track.  

3. The top of the lamp holder is a top plate, and two protruding elastic terminals are arranged on the top of the top plate.

4. The top of the lamp holder is arranged in the guide rail, and the two elastic terminals of the top plate are in contact with the two conductor pieces in the guide rail. The lamp holder can be directly inserted into the guide rail, which can make the lamp holder move laterally and adjust the position of the light. Compared with conventional lamps, the lamp holder has the advantages of small volume, less power consumption, good luminous effect, convenient adjustment, and movable.

How to maintain track lights? 

1. When using track lights, try not to switch frequently, because the lamp is frequently started, the current through the filament is greater than the current when working, and the temperature of the filament will rise sharply, thus reducing its service life.  

2. Track light in the cleaning and maintenance, can not change the structure of the lamp, also do not replace the track light accessories.  After cleaning and maintenance, it is best to install the lamp as it is. Do not leak or install the lamp. If the lamp is found to be aging, dark, and not bright, it is necessary to replace the lamp in time to prevent the occurrence of ballast burning and other unsafe phenomena.